Vatac Pump Protection Valve is suitable for bypass with high pressure differential, maximum pressure differential is 30MPa, and specific choice is determined by factory. Multistage decompression type M type bypass can eliminate noise made by high-speed flow medium; prevent damage of cavitations erosion and braising to valve components.

Vatac Pump Control Valve is equipped with below Main Performance advantages:

» Automatic recirculation control valve including recycling stream decompression facilities, high-pressure medium through the flow around several small diameter, a lot of energy, and reduce stress.

» Pump protection valves have only very low flow recirculation, cooling pump, then pump during normal operation, there is no recycling, saving for a continuous recycling of the consumption of electricity and water.

» Automatic recirculation control valve does not require electrical wiring; do not need two valves in series, one for the adjustment, the other for cutting. And the high-pressure systems are prone to cable and high speed flow to minimize erosion.

» With reasonable design, stable running, no noise, long life, etc., can completely replace the imported products.

» Simple structure, low cost, long life, suitable for low pressure working condition.0

» Easy for installation, can be installed vertically or horizontally on pump outlet.

» Applicable Medium: water, oil, methanol and other liquid medium.

» Working temperature: -196°C~+300°C

Vatac Pump protection valves (automatic recirculation valve) are with main features as below:

» Nominal Diameter: 1”~12”

» Engineering Pressure: CL150~900

» Bypass Size: 1/2" DN (standard); or special

» Recommended Flow Rate: 4 to 6 m / s up to 8 m / s

» Ends Connections: Flanged (ANSI or DIN)

» Main Body Materials: cast steel, forged carbon steel, beryllium cast chrome-nickel-molybdenum stainless steel, chrome-nickel-molybdenum-beryllium steel forging

» Trim Material: chrome steel, forged chrome-nickel-chromium-molybdenum stainless steel